Industrial Shredders
Standard shredders cannot reliably process 1-ton FIBC bags — the oversized dimensions bridge the hopper and the residual powder content clogs cutting chambers. This shredder is configured for bulk bag feedstock: a wide-mouth hopper, heavy-duty dual-shaft rotor, and residue management that keeps large woven bags feeding steadily without machine stops.
Scroll
The key differences are the wide feed opening and heavy-duty rotor — both sized for oversized, dense FIBC bulk bags that standard shredders cannot process.
Whole FIBC bags (up to 1–2 tonnes) are loaded via forklift or crane directly into the oversized hopper. The wide-mouth design prevents bridging — the most common reason standard shredders fail on jumbo bags.
Counter-rotating dual shafts grip the woven PP material and pull it into the cutting zone. The dual-shaft design handles the thick, layered construction of FIBC bags without slipping on the smooth woven surface.
Residual powder, granules, or bulk content inside bags passes through the cutting zone and can be separated by a downstream rotary screen or cyclone. This prevents residue from contaminating the shredded PP recyclate.
Shredded PP strips exit through a bottom screen into a blower, conveyor, or washer inlet. Screen size is selected based on whether output feeds a washing line, granulator, or direct pelletizer.
Standard shredder hoppers are too narrow for 1-ton FIBC bags — material bridges above the rotor and throughput drops to zero. The oversized hopper accepts full bags without pre-cutting.
PP woven fabric slips on single-shaft rotors designed for film. Counter-rotating dual shafts actively grip and pull the woven material into the cutting zone at a consistent rate.
FIBC bags often contain residual powder (cement, fertiliser, chemical). The integrated residue separation configuration prevents contamination from mixing into the shredded PP output.
Capacities from 500 to 3000 kg/h match industrial-volume big bag waste streams from chemical plants, food processing, and agricultural distribution centres.
Full FIBC bags bridge the hopper and do not feed into the cutting zone.
The oversized wide-mouth hopper is dimensioned for full 1-ton bags. Bridging is eliminated by the hopper geometry, not by pre-cutting the bags manually.
Smooth PP woven fabric slips off single-shaft film shredder rotors.
Counter-rotating dual shafts actively grip the woven surface from both sides, pulling material into the cutting zone regardless of the fabric's smooth, slippery texture.
Residual cement, fertiliser, or chemical powder contaminates the shredded PP output.
The residue separation stage — rotary screen or cyclone — separates fine residue from shredded PP strips before the recyclate moves to downstream processing.
Output strips are too long or uneven for the downstream granulator or washer.
Screen size is selected based on the downstream requirement. Multiple screen options from 40 to 120 mm give precise control over output strip size.
Visual references for FIBC bulk bag feedstock conditions before and after shredding.
Standard 1-ton FIBC bags as received from chemical, agricultural, or food industry operations. Use this to confirm bag dimensions, fill level, and residue type before selecting the hopper width and rotor configuration.
Shredded PP woven strips exiting the bulk bag shredder, ready for a washing line, granulator, or direct pelletizer. Strip size is controlled by screen selection based on the downstream process.
View the machine workflow under real operating conditions.
Full and partially-filled FIBC bags from chemical, mineral, and food industries shredded into strips for PP recycling — including bags with residual powder content.
Large-format PP woven sacks from agriculture (fertiliser, seed), construction (cement, sand), and food processing shredded for clean recyclate recovery.
Oversized flexible intermediate bulk containers and large woven PP packaging that exceeds the feed dimensions of standard single-shaft shredders.
Bulk bag waste streams from distribution centres, warehouses, and manufacturing plants processed into consistent output for a PP washing and pelletizing line.
Heavily powder-laden, wet, or soiled big bags from cement, fertiliser, and mining operations — residue is separated before the PP recyclate enters the washing line.
Used as a first-stage size reducer before a friction washer, float-sink tank, and centrifugal dryer — reducing bulk bag volume and improving washing efficiency at downstream steps.
| Model | Typical Throughput | Sizing Reference |
|---|---|---|
| BB-500 | 400–600 kg/h | Dual shaft | 30 kW | Feed 1200×800 mm | Screen 40–60 mm |
| BB-1000 | 800–1200 kg/h | Dual shaft | 55 kW | Feed 1500×1000 mm | Screen 50–80 mm |
| BB-2000 | 1500–2000 kg/h | Dual shaft | 90 kW | Feed 1800×1200 mm | Screen 60–100 mm |
| BB-3000 | 2000–3000 kg/h | Dual shaft | 132 kW | Feed 2000×1500 mm | Screen 80–120 mm |
Use these for planning only. Final model depends on bag dimensions, residue type and volume, required throughput, and whether output feeds a washer, granulator, or pelletizer.
FIBC shredder sizing depends on bag dimensions, residue type, and downstream process — not just throughput target.
Specify the full FIBC bag dimensions (L×W×H) and rated capacity (500 kg, 1000 kg, 1500 kg). This determines the minimum hopper opening and rotor width required.
State whether bags contain residual powder (cement, fertiliser, chemicals, food), granules, or liquid traces. Residue type determines the separation stage required and affects knife wear rates.
Confirm whether bags are empty (trace residue), partially filled, or full. Full bags require higher motor power and affect throughput calculations significantly.
Confirm whether shredded output goes to a washing line, granulator, or direct pelletizer. This determines the required screen size and whether additional residue separation is needed.
| Criteria | Standard Film Shredder | Rumtoo Bulk Bag Shredder |
|---|---|---|
| Hopper Size | Sized for baled film — bridges on full FIBC bags | Wide-mouth hopper accepts full 1-ton FIBC bags without pre-cutting |
| Rotor Type | Single shaft — slips on smooth PP woven surface | Dual shaft — grips and pulls woven fabric from both sides |
| Residue Handling | No residue separation — contaminates recyclate | Integrated rotary screen or cyclone separates residue from PP strips |
| Application Fit | Optimised for lightweight flexible film | Configured specifically for heavy woven bulk bags and FIBC |
Full FIBC bags can be fed directly into the wide-mouth hopper without pre-cutting. The hopper dimensions are sized for standard 1-ton bag footprints. Oversized or non-standard bags should be confirmed before ordering.
Residue passes through the cutting zone with the shredded PP and is separated by a downstream rotary screen or cyclone. The separation stage is configured based on residue type (fine powder, granules, or trace amounts).
The film shredder targets lightweight flexible film and standard-size woven bags with an anti-wrap single shaft and hydraulic pusher. The bulk bag shredder is configured for oversized FIBC bags: wider hopper, dual-shaft grip, and residue separation — different problems require different configurations.
This depends on the residue type and local regulations. Send the bag application and residue description for a specific recommendation on suitable configurations and any additional sealing or extraction requirements.
Bag dimensions and rated capacity, residue type and estimated volume per bag, required throughput (kg/h or bags/h), and downstream process (washing line, granulator, or pelletizer).
Send your FIBC bag dimensions, residue type, throughput target, and downstream process. Rumtoo will recommend the right model and residue separation configuration.
Request Bulk Bag Shredder Proposal